Store
 

A typical recording takes up about 30-45 MB of space per minute on your iOS device. So an average movie will take up about 2-3 GB of space.

Every tizi has its own tizi Code. You will find the tizi Code for your device here:
  • On the first page of the Quick Start Guide
  • In the battery compartment of your tizi Wifi and tizi+

With TV for Mac you can use these USB TV receivers with your Mac:

  • tizi for Mac (DVB-T)
  • TubeStick mini Rev. 2 (EQ20511)
  • tizi Video Recycler as well


  • In addition TV for Mac also supports these TV receivers that you connect wireless with your Mac:

  • equinux tizi WiFi
  • equinux tizi+
  • tizi WiFi by Belkin
  • iCube Tivizen nano
  • Hauppauge myTV 2GO
  • Elgato Tivizen


  • You don't have a TV receiver yet? Visit our website www.tizi.tv for more information about tizi TV receivers.

    DVB-T2 signals are currently not supported by tizi, tizi+ of tizi for Mac (DVB-T). tizi supports all channels that broadcast using the MPEG-2 video and MPEG-1 Audio Layer II standards.

    Please download the tizi.tv App for your Mac from our website:

    www.tizi.tv/app

    Just enter here the tizi code you find in the instruction booklet.

    You're using an iPhone or iPad with iOS 9 and tizi go?

    Visit our website and log in using your equinux ID and password.

    You can also register your tizi go if you have not done so.
    After logging in, you can download the tizi go app.

    In order to use tizi for Mac on your computer, there are some audio codecs necessary. For legal reasons these codes are not available in the tizi.tv version from the Mac App Store.
    Because of this the version from the Mac App Store supports only certain tizi devices:

  • You purchased tizi for Mac DVB-T or DVB-C? In this case, please download tizi.tv for Mac via my.tizi.tv
  • You are using tizi or tizi+ with an iPad or iPhone and want to watch TV also on your Mac? In this case you can download tizi.tv from the Mac App Store. You will need the in-App purchase "tizi Wifi Support".
  • download Mac software for tizi for Mac (DVB-C) via: www.tizi.tv/app

    download Mac software for tizi for Mac (DVB-T) via: www.tizi.tv/app

    download Mac software for tizi for WiFi via: www.tizi.tv/app or from Mac App Store

    You will find the tizi code in the instruction booklet for your device. For legal reasons tizi.tv from the Mac App Store does not contain the required audio codecs for your tizi hardware.

    In the basic settings, under Film > tizi.tv – you can always change the location of where your recordings will be saved.

    The bluetooth and wifi chips on the iPad and iPhone share a single antenna. So if you're using bluetooth headphones, your wifi performance will not be as good. This isn't noticeable if you're just surfing the web, as that only requires a small amount of data. But a TV signal requires a lot more data, so you may start seeing performance issues.

    We currently don't recommend using bluetooth devices while using tizi.

    All recordings are saved as MPEG-2 in tizi.tv and can be opened and viewed in QuickTime, VLC media player or Handbrake . We don't use an own, proprietary format. You can share your recordings (via Vimeo, Messages, AirDrop, Email and Facebook) or export them to MP4 to use them in iMovie.

    The amount of disk space you need for your recodings depends on the used video. A one hour recording has an approximately size of 1.6 GB.

    tizi.tv supports OS X – macOS Sierra.

    Yes, your Mac Must be on, and the tizi software must be running.
    No. However, you can use one of our mobile TV Hotspots, tizi or tizi+ for this.
    The tizi charger is optimized for charging the tizi battery optimiert. This can be used for the tizi, tizi+ and tizi battery.
    The tizi app digitalizes as an MPEG-2 video.

    On our website www.tizi.tv you will find TV receivers for your Mac to receive digital TV on your computer.

    Yes, you can use timeshift with tizi.tv and your iOS device – just hit pause!

    In order to send your TV picture wirelessly to your device, tizi needs to transmit a fairly large amount of data across its wireless network. For optimal performance you should place tizi away from other wireless devices.

    When you turn tizi on, it tries to find a wifi channel that isn't being used. If it can't find an empty channel, tizi will share a wifi channel with other devices. If you notice performance issues with your other devices, try placing tizi further away from other wireless devices, or try choosing a different wireless network channel on your wifi router or Apple Airport Base station. Check your wireless base station's manual for details.

    The exact number of channels you'll be able to watch with tizi depends on where you live and how strong the TV signal strength in your area is.
    Check out the Digital Television Map to get an idea of which channels you'll be able to pick up.
    Get a copy of the tizi Video Recycler! Make a quiek digital copy of your tapes and then take them to the dump! You’re happy, and so’s your wife!
    Open your recorded shows with QuickTime and choose “Export to iTunes”. Now you can transfer your shows to the iPad or Apple TV. Alternatively, you can also use apps such as Handbreak for this.

    Yes, if you have an Apple TV and an iOS device, you can watch your recordings or live TV with AirPlay Mirroring!

    You will need a strong network connection to allow it to work smoothly. Connecting your Apple TV via an ethernet cable is usually best for this.

    For tizi:
    Set up tizi so that it's set to tizi@Home mode which you can find instructions on how to do here. Connect tizi to the same network that your Apple TV is connected to, choose your channel and turn on Mirroring over AirPlay.

    So for example, once you've picked your channel on tizi.tv on your iPhone, double click the iPhone's home button, swipe twice on the row of apps to go left past the music controls and tap the AirPlay button.

    First you ‘ll need to convert your video into an MPEG-4 file. To do this, go to the Recordings Library and choose the desired clip. Then click on the button, “Export to iMovie”.

    If you can't seem to find any channels in the same place you used to find lots then it may be worth just resetting the app. To do this:

    • Please quit the app entirely by double clicking the home button, holding down on the tizi icon and pressing the red 'X' that appears.
    • Then go to the 'Settings' app on the iPad
    • Scroll down to tizi.tv > Reset App and Reset EPG > ON (both).
    • Then reset your tizi as well by poking a paperclip in the little hole on its side.
    Of course. We tested tizi go with the iPhone 5 and the Lightning to 30-pin Adapter and it works perfectly.

    FAQ Image - S_210.png
    Load more entries
    FAQ
    Handbuch
    Nachricht senden
    Bitte nutze eine möglichst kurzes Kabel für das Nachladen des Bose Soundlink Mini II. Es liegt am Kupfergehalt des Kabels. Leider schwankt dieser extrem, besonders No-Name Kabel enthalten kaum mehr Kupfer.

    Endgeräte, die mehr als 1.000mA brauchen, reagieren darauf empfindlich. Bei Kabeln immer Markenprodukte kaufen, da der Markt leider mit Billigware überschwemmt wird.

    Wir haben für dieses Problem auch ein Video erstellt:

    {YOUTUBE_s2HNpKlbew4}
    An der tizi Tankstation kannst du 5 Geräte gleichzeitig laden. Die Tankstation verfügt an jedem USB-Port über eine dynamische Erkennung des bestmöglichen Ladestroms für das jeweiliges Gerät (Auto Max Power Technologie). Die tizi Tankstation enthält ein 1,2m Stromkabel womit du sie optimal stationär auf dem Schreitisch oder Sideboard positionieren kannst.
    Die Tankstelle ist dagegen kompakter und eignet sich gut für Reisen.

    Ja, simultane Laden von zwei iPads oder iPad Air mit je 2.1A wird an den Super+ Ports unterstützt.

    Die tizi Tankstelle hat einen sehr niedrigen Energieverbrauch im Bereitschaftsmodus, der unterhalb der EU Vorgabe liegt.

    Die roten LEDs zeigen den Ladestrom pro Zapfsäule an.
    Unter 200mA Ladestrom ist die LED für diesen Port aus.
    Zwischen 200mA - 1,1A Ladestrom blinkt die rote LED.
    Zwischen 1,1A - 2.1A Ladestrom leuchtet die LED dauerhaft.
    Ab 2,1A Ladestrom blinkt die LED schnell.

    Ja, wenn deine Geräte insgesamt nicht mehr als 4200 mA fordern.
    Die roten LEDs zeigen dir, wie hoch der Strombedarf am jeweiligen USB-Port (Zapfsäule) ist. Blinken bedeutet: schnelles Laden; konstantes bedeutet Leuchten: sehr schnelles laden.

    LED aus: keine Ladung, Ladung bis 200mA
    LED blinkt: Ladung 200mA bis 1,1A
    LED leuchtet: Ladung 1,1A - 2,1A
    LED blinkt sehr schnell: über 2,1 A (Achtung, der Port ist dann ggf. überlastet)
    iPhones und iPads sind *keine* "dummen" Akkus, die man an ein Ladegerät steckt. Viele glauben das allerdings und so machen viele Mythen im Internet die Runde. Woher kommt dieser Irrglaube? Man erinnert sich wohl an das Laden von Haushaltsbatterien (AA/AAA) oder Autobatterien an Ladegeräten. In diesen Szenarien übernimmt wirklich das Ladegerät den aktiven Part, der Akku ist "dumm" und wird beladen. Und im schlimmsten Fall wird der Akku kaputtgeladen. In iPhones/iPads hingegen werden von Apple aktive Ladecontroller verbaut. Die iPhones/iPads entscheiden selbständig, wieviel Stromstärke und somit Leistung einem Netzteil entnommen wird. Keinenfalls "drückt" ein tizi Ladegerät eine bestimmte Stromstärke in ein iPhone/iPad! Wie kommt es nun dazu, dass ein tizi Netzteil iPhone/iPads immer mit maximal schneller Leistung versorgt? Man stellt sich das am besten wie folgt vor: Beim Einstecken fragt ein iPhone/iPad über ein Kommunikationsprotokoll beim Netzteil nach, wieviel Leistung maximal entnommen werden darf. Unsere tizi Netzteile (z.B. Tankstelle, Tankstation, Turbolader, Kraftprotz, usw.) antworten korrekt und das iPhone/iPad beginnt zu laden. Anfangs vielleicht mit 500mA, dann 1A, anschließend mit 2.4A usw. Je nach Modell und nach aktuellem Ladestand, aber auch nach Akkutemperatur des iPhone/iPads, entscheidet der Apple Ladecontroller aktiv und selbständig, wieviel Leistung bezogen werden soll. Durch den vorneweg erfolgten Austausch über die Maximalleistung kann der Apple Ladecontroller sich darauf verlassen, diese Leistung über die Ladezeit hinweg jederzeit zu bekommen. Was machen tizi Ladegeräte besser als "herkömmliche" oder Billignetzteile? Bei Netzteilen können auf verschiedenen Ebenen Fehler oder Probleme auftreten. Zwei "Klassiker" seien hier genannt:
    • Bei einem "Billignetzteil" schlägt zB. oft schon die Kommunikation fehl, d.h. Netzteil und iPhone/iPad "verstehen" sich nicht. Bekommt ein iPhone/iPad vom Netzteil beim Austausch der Leistungsdaten ein eigenartiges Ergebnis (z.B. die Protokolle beider Geräte verstehen sich nicht), dann lädt ein iPhone nur mit maximal 500mA, was sehr sehr langsam ist. Ein iPad meldet dann z.B. "Lädt nicht". Das iPhone/iPad tut dies, um das Netzteil keinesfalls zu überlasten.
    • Ein anderes Problem ist mögliche Überlast - und somit auch Brandgefahr: Das Billignetzteil erzählt dem iPhone/iPad zwar, dass es z.B. in der Lage ist, mit bis zu 2.4A aufzuladen. Fordert ein iPad im Laufe des Ladeprozesses dann diese Stromstärke an, wird das Netzteil überlastet. Und schaltet im besten Fall ab. Oder es brennt durch.
    tizi Netzteile sind also speziell abgestimmt auf Apple Geräte, "sprechen" korrekt mit den von Apple verbauten Ladecontrollern und können den Akku eines iPhone/iPads immer mit der angeforderten Stromstärke maximal möglich versorgen. Niemals wird dabei der Akku eines iPhone/iPads überlastet oder gar "kaputtgeladen".
    Sie finden den Quickstart Guide für Ihren tizi direkt auf unserer Webseite:
    http://my.tizi.tv

    Hier können Sie auch alle Ihre Geräte registrieren und hast so alle zusammen auf einem Blick.
    http://tizi.tv/register

    Alle Android Geräte wie Samsung Galaxy oder HTC Geräte und sonstigen USB Geräte werden am besten am Super Port geladen. Das gilt auch für Amazon Kinde, Kindle Fire usw.

    Kurz: an Super Plus dürfen Ihre iPads tanken. Die Super Plus Ports (2,1A) sind nämlich optimiert zum schnellen Laden von iPads oder dem iPhone 6. Hier können Sie beispielsweise 2 iPad Air Modelle gleichzeitig anschließen.

    An den beiden anderen Geräten können beispielsweise Galaxy Tablets oder Geräte mit bis Super-USB-Ports laden. Natürlich können Sie an beiden Ports Super/Super Plus ältere iPhones und Android-Geräte laden.

    Ja. In diesem Fall laden die iPhones am Super+ und am Super Port mit 1A, also schnell.

    Ja. Dein tizi funktioniert auch in USA. Einfach einen Adapterstecker davorstecken! Das Netzteil in deinem tizi kann sowohl 220V als auch 110V.

    Ja, der Diesel-Port ist hierfür geeignet. Aber am denkbar ungünstigsten, was mit den Spezifikationen des USB-Standards zusammenhängt. Besser ein iPad an "Super" oder "Normal" anschließen, an einem dieser Ports entscheidet sich das iPad dann für einen 1A Ladestrom (legt das iPad so fest, auch wenn hinter 'Normal' physikalisch mehr als 2A möglich wären). Das ist entsprechend auch der Vorteil von "Super Plus", denn an diesem Port bekommt das iPad volle 2,1A.

    Laut unseren Erfahrungen deutet dieser Fehler bei der Benutzung in Kombination mit einem tizi Gerät auf Anschlussprobleme mit dem verwendeten Kabel hin. Bitte prüfe das Lightning Kabel auf folgende Defekte:
    • Das Kabel ist gebrochen, geknickt, oder "ausgefranst"
    • Die Kontakte des Lightning Stecker sind teilweise dunkel verfärbt
    Generell empfehlen wir um einen Defekt des Kabels auszuschließen, immer einen Wechsel des Kabels.
    Die Rechnung für tizi Produkte können jederzeit selbständig und auch wiederholt heruntergeladen werden: http://tizi.tv/bestellungen Bitte beachten: Rechnungen sind erst verfügbar, wenn Amazon die Ware verschickt hat.
    Deinem tizi Produkt liegt eventuell eine Karte für die tizi Club Mitgliedschaft bei. Eine Registrierung deines Produktes mit diesem Club Code gibt dir einige Vorteile: - Information über neue tizi Produkte, teilweise vorab und exklusiv für Club Mitglieder - Bequeme Verwaltung und Übersicht über die eigenen tizi Produkt über my.tizi.tv - Bequemer Zugang und Abruf von Rechnungen über das my.tizi.tv Portal - Exklusive Aktionen für Club Mitglieder - Vorrangige Bearbeitung von Support Anfragen Wir empfehlen daher allen Kunden, von diesem Angebot Gebrauch zu machen und die eigenen tizi Produkte zu registrieren.
    Weitere Einträge laden