VPN Tracker is a professional VPN client for macOS and iOS, designed for businesses. It provides secure and reliable remote access to internal company networks from any Mac, iPhone and iPad.

Absolutely. VPN Tracker is the macOS alternative to Windows-based VPN clients like Cisco AnyConnect, Shrew Soft VPN, FortiClient, GlobalProtect (Palo Alto Networks), SonicWall Mobile Connect, WatchGuard Mobile VPN, OpenVPN, Check Point Endpoint Security VPN, and F5 BIG-IP Edge Client, and others, with added features tailored for Apple devices.

As businesses transition away from Windows 10, many are adopting macOS. VPN Tracker ensures these organizations can maintain secure, enterprise-grade VPN access for remote work, IT administration, and field staff.

The WireGuard protocol itself does not support 2-Factor Authentication (2FA) for VPN connections. However, when using WireGuard connections with VPN Tracker, you can enhance your overall security by enabling 2FA for your VPN Tracker account.

This means your VPN configuration and access are protected with an additional layer of security, while your WireGuard connections remain end-to-end encrypted for maximum protection.

Using VPN Tracker is the best way to benefit from the performance and security of WireGuard, along with modern account-level protections like 2FA.

No, macOS does not support establishing a VPN tunnel within an existing VPN connection (“tunnel-in-tunnel”). If you’re already connected to a VPN, the system typically prevents setting up a second VPN tunnel through that connection. Background: This is a limitation of macOS itself, not of VPN Tracker. It affects use cases such as: • Trying to connect to a second VPN through an already active VPN tunnel. • Attempting to route site-to-site connections through an existing user VPN session.

Yes, VPN Tracker is fully optimized for Apple Silicon Macs, including M1 and M2 chips, offering high performance and long battery life.

Usually not. VPN Tracker works with your existing VPN infrastructure. It supports configurations for SonicWall, Fortinet, Cisco, Sophos, and many others out of the box.

Yes, VPN Tracker offers team management features including configuration deployment, license control, and access auditing for IT admins.

No, that’s not possible. Due to how WireGuard works, each person needs their own personal connection. Sharing a connection between multiple users is not allowed and will lead to connection issues. Similarly, if an employee wants to use the VPN on more than one device (e.g. Mac and iPhone), they will need a separate connection for each device. With my.vpntracker.com, you can manage all your connections centrally: For example, you can create 100 WireGuard connections in advance, upload them, and assign them to employees and their devices as needed (e.g. Mr. Miller/Mac and Mr. Miller/iPhone).

Yes, absolutely! Our support team is happy to assist you. Click here to open the contact form.

Disabling this behavior entirely is not possible. VPN Tracker waits a certain amount of time for a response from the authentication server. If there’s no response, the app cannot know whether the password was incorrect or if the server is simply slow to respond—so it asks for the password again, just in case. Possible alleviation of the problem: Increase the timeout value to give VPN Tracker more time to wait for a server response. You can adjust this under: “Credential Prompt Timeout” (German: Anzeigedauer für Authentifizierungsdialoge). This helps reduce unnecessary password prompts when connecting to slow or overloaded servers.

Yes, VPN Tracker supports a wide range of protocols including IPsec, L2TP, Cisco EasyVPN, OpenVPN, IKEv2, and SSL VPNs — fully compatible with most enterprise-grade firewalls and routers.

Yes. VPN Tracker is built for modern IT environments with support for certificate-based authentication, MFA, and integration with enterprise-grade security policies.

VPN Tracker offers detailed setup guides and import tools to help migrate VPN configurations from Windows clients to Mac quickly and securely.

If you're experiencing issues with your World Connect connection in VPN Tracker, here's what to do:

1. Contact Support

In VPN Tracker, go to the Help menu and select "Contact Support".
In the window that opens:

• Enter "World Connect Issue" in the subject line.
• Describe the problem you're having so our support team can help you quickly.

2. Try These Steps in the Meantime

• If you're using a country-specific connection (e.g. "United States"), try unchecking the "Fastest Destination" option.
• Once unchecked, you can manually choose from the available cities (e.g. New York, Los Angeles, Miami, etc.).
• Try connecting to a different city to see if the issue is specific to one location.

These steps often help resolve temporary connection issues.

There are a number of possible causes for such a behavior. This FAQ will help you to find out what is causing the problem in your specific situation. In this FAQ we will be using destination device as a generic term for the device you are trying to connect to. The destination device can be anything from a normal computer, to a server, to a network printer.

1. Are you trying to connect to the destination device using a host name?

If you are using a host name, please try once using its IP address instead. If that works, the problem has to do with DNS resolution. Please make sure DNS is enabled for the VPN connection and correctly configured. Note that using Bonjour or NETBIOS hostnames is generally not possible over VPN.

2. Is the IP address you are connecting to really part of the remote network?

For example, if your remote network is 192.168.13.0/24, you should be able to connect to IPs starting with 192.168.13.x, but connections to IPs starting with 192.168.14.x will not work as they are outside the address range of traffic tunneled through the VPN.

3. Is the local address in VPN Tracker part of the remote network?

Using a local address in VPN Tracker (Basic > Local Address) that is part of the remote network is not possible with most VPN gateways. Please use a local address that is outside all remote networks. For example, if your remote network is 192.168.13.0/24, do not use an address starting with 192.168.13. If you are using an automatic configuration method (e.g. Mode Config, EasyVPN, DHCP over VPN) you may be able to assign a local address to VPN Tracker that is part of the remote network. Refer to the configuration guide for your VPN gateway for more information.

4. Could multiple VPN users use the same local address?

If multiple VPN users exist, pleas make sure no two users are using the same local address (Basic > Local Address), otherwise one of them will not be able to use the tunnel anymore whenever both of them are connected. If that field is empty in your configuration, VPN Tracker will just use the IP address of your primary network interface as local address, and of course, this can also cause an address conflict with another user, that’s why we do not recommend to leave that field empty if there are multiple VPN users.

5. Can you ping the LAN address of the VPN gateway?

You can find a ping tool directly in VPN Tracker under Tools > Ping Host. The LAN address of the VPN gateway is special in the regard that this address doesn’t need to be routed at all. So if you can ping that address but no other remote address, it is most likely a routing issue at the remote end.

6. If you can't ping anything, try re-running the VPN Availability Test

The VPN Availability Test can be found in the menu: Tools > VPN Availability Test. Then try connecting the VPN again. The results of this test depend on the capabilities of your local Internet router/modem or the Internet connection itself and they influence how the VPN tunnel is established. VPN Tracker automatically runs the test for every new Internet connection it is able to detect but even if a connection has been tested before, there are various reasons why the behavior of that connection may have changed in the meantime.

7. Is your VPN gateway the default gateway (router) of its network?

If the VPN gateway is not the default gateway, you will in many cases need a suitable routing setup in order for responses to reach you. Whenever a device doesn’t know how to reach an IP address directly, it forwards its reply to its default gateway and if that isn’t the VPN gateway, it won’t know what to do with that reply data. In that case its important to configure the default gateway to forward replies to VPN users to the VPN gateway.

8. Is your VPN gateway the default gateway (router) of its network?

For more details, we would like to direct you to the following FAQ entry.

The Unifi Dream Machine (UDM) configures OpenVPN by default with the topology "Host to all networks". This means that the entire network traffic, including your internet traffic, is redirected to the VPN tunnel. This can happen that you no longer have access to devices or services in your local network-because all data traffic runs via the VPN connection to the UDM. Solution: If you only want to access the distant network (e.g. in the office) and at the same time want to continue using your local network, simply change the topology setting: Select the affected connection in VPN Tracker Click on "Edit". Change the topology from "Host to all networks" to "Host to Network". Save the connection. The next time you establish a connection, your remote networks will be automatically accessible.

If you’re setting up a VPN connection, you’ll often come across the term “pre shared key” or “VPN shared secret.” This guide explains what it means, how to set it up, and what to do if you lose it — so you can get your VPN running smoothly on your Mac.

What is a pre shared key VPN, or what is a pre-shared key for VPN?

A VPN pre shared key (also called VPN shared secret, VPN PSK, shared key, or preshared key) is like a password that secures your VPN connection. This IPsec pre shared key is configured on your VPN gateway — such as a firewall or router — and must match on your device to establish a secure VPN tunnel.

Without the correct key, your device cannot connect, ensuring that your VPN connection stays protected from unauthorized access.

Note: Some VPN gateways require the shared secret key to contain up to 512 alphanumeric characters. Check your device’s manual or use a pre shared key generator tool if needed.

How to Set Up a Pre Shared Key

VPN Tracker makes setting up your VPN simple and secure. It provides step-by-step setup guides for all major VPN gateway manufacturers, showing you exactly how to:

• Create and configure a pre shared key or shared secret key on your firewall or router
• Enter the VPN PSK on your Mac in VPN Tracker
• Check that your VPN connection is working securely

Browse VPN setup guides here

To get started, download VPN Tracker here: Download VPN Tracker

How to Recover a Lost Pre Shared Key

If you’ve lost your pre shared key or VPN shared secret, here’s how you can recover it:

• Check VPN Tracker Personal Safe: If you saved the connection in your Personal Safe, you can redownload it with the key.
• Search Your Mac Keychain: Go to Applications > Utilities > Keychain Access, search for “Shared Secret,” and find your saved VPN PSKs.
• Restore from Backup: If you use Time Machine Backup, you can try restoring an older connection version that contains the pre shared key.
• Check Your Firewall or Contact Your VPN Administrator: Refer to your device manual or ask your network administrator to retrieve the shared key from your VPN gateway or firewall.

Need help with your VPN setup?

Visit VPN Tracker — the #1 VPN client for Mac for expert tools and guides to get your VPN running smoothly.

You can also conveniently purchase VPN Tracker via bank transfer. Please note that bank transfer is only available for regular purchases – trial versions cannot be ordered via bank transfer.

How to pay by bank transfer:

• Go to the VPN Tracker Store: my.vpntracker.com/store
• Add the product of your choice to the cart.
• Proceed to checkout.
• In the “Add payment method” section, click on the three-dot symbol (“…”) next to the other payment methods.
• Select “Bank Transfer” from the dropdown.

After completing your order, you will receive our bank details to make the payment. Your license will be activated once your payment has been received and processed. Please allow up to 5 business days for processing.

Note:
Unlike card or Apple Pay purchases, activation is not immediate. Your license will only be issued once the payment has been received and reviewed by our team.

All equinux accounts support secure two-factor authentication (2FA) as an additional layer of security for your sensitive data. To set up 2FA for your account, log in to id.equinux.com and go to the tab Multifactor Authentication. Here you will find the QR code / authentication key needed to set up 2FA for your equinux account with your OTP solution.

equinux 2FA supports all major authentication and password apps, including:

• Google Authenticator
• Microsoft Authenticator
• Twilio Authy
• 1Password
• FreeOTP
• Bitwarden